Development and application of multi-wave UVP and PIV measurement methods to measurements of single-phase and bubbly two-phase flows in a vertical pipe
Tóm tắt
Two advanced measurement methods, i.e. multi-wave UVP (ultrasonic velocity profile) and PIV (particle image velocimetry) methods have been developed and applied to the measurement of single-phase and bubbly two-phase flows in a vertical pipe. These are non-intrusive measurement methods which are able to measure the instantaneous velocity profile and 2D velocity field. Thanks to the instantaneously measured velocity profile of single-phase and two-phase flows the characteristics and behaviour of single-phase and two-phase flows can be clarified. Relevant flow parameters can be obtained. The multi-wave UVP method, which is highly compact and able to work with opaque fluids and containers, is expected to be applied to the practical measurement of instantaneous velocity profiles, flow rate and local void fraction, etc., in industrial piping systems in operations such as oil and gas two-phase flows with the presence of deposition, crystalisation and corrosion. Therefore, it could be a very useful measurement tool in the oil and gas and power generating industries.
Các tài liệu tham khảo
Yunus A. Çengel, Robert H.Turner, John M.Cimbala. Fundamentals of thermal-fluid sciences... McGraw-Hill Higher Education. 4th edition. 3 February 2012.
M.Ishii, T.Hibiki. Thermo-fluid dynamics of twophase flow. Springer. 2th edition. 2011: 518p.
J.M.Delhaye, G.Cognet. Measuring techniques in gas-liquid two-phase fl ows. Springer-Verlag. 1984: 746p.
Malcolm J.W.Povey. Ultrasonic techniques for fluids characterization. Academic Press. 5 August 1997: 214p.
S.Satomurai. Study of the flow patterns in peripheral arteries by ultrasonics. The Acoustical Society of Japan. 1959; 15: p. 151 - 158.
I.A.Hein, W.D.O’Brien. Current time-domain methods for assessing tissue motion by analysis from reflected ultrasound echoes-a review. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. 1993; 40(2): p. 84 - 102.
Tomonori Ihara, Hiroshige Kikura, Yasushi Takeda. A very low velocity measurement using ultrasonic velocimetry. Proceedings of the 8th International Symposium on Ultrasonic Doppler Methods for Fluid Mechanics and Fluid Engineering. 2012: p. 33 - 36.
Y.Takeda. Velocity profile measurement by ultrasound Doppler shift method. International Journal of Heat and Fluid Flow. 1986; 7(4): p. 313 - 318.
Markus Raffel, Christian E.Willert, Steve T.Wereley, Jürgen Kompenhans. Particle image velocimetry, apractical guide. Springer. 2007.
Masanori Aritomi, Shirong Zhou, Makoto Nakajima, Yasushi Takeda, Michitsugu Mori, Yuzuru Yoshioka. Measurement system of bubbly flow using ultrasonic velocity profile monitor and video data processing unit. Journal of Nuclear Science and Technology. 1996; 33(12): p. 915 - 923.
Hideki Murakawa, Hiroshige Kikura, Masanori Aritomi. Application of ultrasonic Doppler method for bubbly flow measurement using two ultrasonic frequencies. Experimental Thermal and Fluid Science. 2005; 29(7): p. 843 - 850.
T.T.Nguyen, H.Murakawa, N.Tsuzuki, H.Kikura. Development of multi-wave method using ultrasonic pulse Doppler method for measuring two-phase flow. Journal of Japan Society of Experimental Mechanics. 2013; 13(3): p. 277 - 284.
M. Honkanen, P. Saarenrinn, J.Larjo. PIV methods for turbulent bubbly flow measurements. Particle Image Velocimetry: Recent Improvements. 2004: p. 239 - 250.
H.Kikura, G.Yamanaka, M.Aritomi. Effect of measurement volume size on turbulent flow measurement using ultrasonic Doppler method. Experiments in Fluids. 2004; 36(1): p. 187 - 196.
1. Tác giả giao bản quyền bài viết (tác phẩm) cho Tạp chí Dầu khí, bao gồm quyền xuất bản, tái bản, bán và phân phối toàn bộ hoặc một phần tác phẩm trong các ấn bản điện tử và in của Tạp chí Dầu khí.
2. Bằng cách chuyển nhượng bản quyền này cho Tạp chí Dầu khí, việc sao chép, đăng hoặc sử dụng một phần hay toàn bộ tác phẩm nào của Tạp chí Dầu khí trên bất kỳ phương tiện nào phải trích dẫn đầy đủ, phù hợp về hình thức và nội dung như sau: tiêu đề của bài viết, tên tác giả, tên tạp chí, tập, số, năm, chủ sở hữu bản quyền theo quy định, số DOI. Liên kết đến bài viết cuối cùng được công bố trên trang web của Tạp chí Dầu khí được khuyến khích.