Evaluation of the characteristics of sequence BH5.2.1, upper Tra Tan, Block A, Cuu Long basin based on core analysis data

  • Nguyen Van Hieu
  • Nguyen Hong Minh
Keywords: -

Abstract

Geological and hydrodynamic modeling of reservoirs and reserve estimation are essential in petroleum exploration and production. The reliability of reservoir models depends mostly on the accuracy of input data, which can be taken from core and fluid analysis. Core analysis provides precise data on reservoir properties that are measured directly on core samples gathered from the wells. The results are also used to calibrate with well logging data to determine rock properties in uncored intervals and to build a general scene of the reservoir. From that, an optimised production and EOR plan can be proposed. This article focuses on evaluating porosity -permeability characteristics of sequence BH5.2.1 based on core analyses, which include porosity, Klinkenberg permeability at net overburden condition, grain ensity, cation exchange capacity, electrical properties and capillary pressure [1-8], performed at the Analysis Laboratory Centre of the Vietnam Petroleum Institute.

References

Hoàng Mạnh Tấn, Nguyễn Hồng Minh. Routine Core Analysis Report. VPI-Labs. 2/2007.

Hoàng Mạnh Tấn, Nguyễn Hồng Minh. Routine Core Analysis Report. VPI-Labs. 1/2009.

Hoàng Mạnh Tấn, Nguyễn Hồng Minh. Routine Core Analysis, VPI-Labs. 5/2006.

Hoàng Mạnh Tấn, Nguyễn Hồng Minh. Sample Analysis Report, VPI-Labs. 6/2007.

Hoàng Mạnh Tấn, Nguyễn Hồng Minh. Routine Core Analysis, VPI-Labs. 11/2006.

Advanced rock properties report. Core Lab Indonesia.

Hoàng Mạnh Tấn, Nguyễn Hồng Minh. Advanced rock properties report, VPI-Labs. 6/2006.

Hoàng Mạnh Tấn, Nguyễn Hồng Minh. Advanced rock properties report, VPI-Labs. 4/2007.

Cao Văn Đạo, Nguyễn Thanh Tuyến. Hoàn thiện quy trình phân tích - thí nghiệm các chỉ tiêu hiện có của Trung tâm Phân tích Thí nghiệm. 9/2011.

Leverett, M.C., L.L. Capillary behaviour in porous solids, Trans. AIME. 1941.

James W. Amyx, Daniel M. Bass, JR. Robert L. Whiting. Petroleum reservoir engineering.

Michael Holmes. Capillary pressue and relative permeability petrophysical reservoir models. Digital Formation, Inc. Denver, Colorado, USA. May 2002.

Y.Salimi Delshad, E.Kazemzadeh, A.Moradzadeh. Combination of capillary pressure and hydraulic flow units for estimation of irreducible water saturation in carbonate hydrocarbon reservoir.

O.Torsaeter, M.Abrahi. Experimental reservoir engineering laboratory workbook. January 2003.

A course in “The fundamentals of core analysis”. Core Laboratories, INC.

H.T.Kennedy, O.E.Van Meter, R.G.Jones. Saturation determination of rotary cores. Petroleum Engineering. 1954.

Published
2013-03-29
How to Cite
Hieu, N. V., & Minh, N. H. (2013). Evaluation of the characteristics of sequence BH5.2.1, upper Tra Tan, Block A, Cuu Long basin based on core analysis data. Petrovietnam Journal, 3, 21-28. Retrieved from https://pvj.vn/index.php/TCDK/article/view/647
Section
Articles

Most read articles by the same author(s)